1
Configure Starface PBX
- Open your Starface admin interface
- Go to Leitungen (Trunks) → Neue Leitung (New Trunk)
- Select SIP-Trunk as the type
- Enter the itellicoAI SIP endpoint (
sip:50ebbp4vhpr.eu.sip.livekit.cloud) as the provider, using TCP as the transport protocol - Configure authentication credentials
- In your Starface firewall, allow inbound SIP traffic from the static IP ranges itellicoAI uses (
143.223.88.0/21,161.115.160.0/19) - Set up inbound routing rules
2
Create SIP Trunk in itellicoAI
Go to Telephony → SIP Trunks → Create SIP Trunk:
- Name: Starface
- Termination URI: Your Starface PBX SIP address
- SIP Auth Username/Password: Credentials from your Starface configuration
- Allowed IPs: Your Starface server’s public IP